First, it will be insulated and wrapped with wires, tied firmly, ladder scaffolding to avoid shaking friction and loopholes. Mobile scaffolding to take grounding treatment, when erected in the wilderness, hillside mobile scaffolding and other construction transport frame, should be equipped with lightning protection devices. Lightning rod available diameter 25 ~ 32mm, wall thickness of not less than 3mm door scaffolding galvanized steel pipe or diameter of not less than 12mm galvanized steel made, in the vertical transport frame on the mobile scaffolding installation lightning rod, should be the derrick side of the middle riser connected to not less than 2 meters above the top, and set up grounding wire ladder scaffolding at the lower end of the riser, while the winch shell should be grounded. The setting of the grounding wire and grounding pole can be referred to the relevant lightning protection door scaffolding earthing regulations. In the event of a lightning strike or heavy thunderstorm during construction, the construction personnel on the mobile scaffold should stand up and move the scaffold away.

Mobile scaffolding as a convenient tool for building construction personnel to facilitate the operation of ladder scaffolding it is very important in the lightning storm grounding and other protective measures. First of all its shell to door scaffolding to take grounding or zero protection measures. When moving scaffolding at night when building construction will be operated with lighting wires through the mobile scaffolding, a low voltage power supply of not more than 12 volts should be used. If more than please follow the steps below scaffolding for operation, for your safety, mobile scaffolding manufacturers morning light believe you will be able to do!